Buy Bambu Lab P2S in India — ₹67,999

Bambu Lab P2S

The P2S: a fast, enclosed CoreXY printer with AI failure detection and a hardened-steel nozzle out of the box.

₹67,999incl. GST₹69,999Save ₹2,000

Build volume256 × 256 × 256 mm

Max speed600 mm/s

CalibrationFully Automatic

Multi-colourAMS

In stock

Free ShippingGST invoice1 Year Warranty

Talk to an Expert

Warranty

1 Year Warranty

Your Bambu Lab P2S includes 1-year warranty support through our reseller service network. Warranty claims may require the original packaging and an unboxing video, subject to the applicable service policy.

Need Help?

Talk to an expert →

GST invoice sent after checkout.

WhatsApp support before and after your purchase.

Returns & Refund Policy →

How it works for you

600 mm/s CoreXY speed

A CoreXY motion system rated to 600 mm/s and 20,000 mm/s² acceleration, with AI failure detection watching every print.

Hardened-steel nozzle included

The included 0.4 mm nozzle is hardened steel, ready for abrasive and reinforced filaments without a swap.

Built-in filament care

Active-venting filament drying and a built-in filament cutter are built into the enclosed chassis.

Broad material range from a hardened nozzle

Because the P2S ships with a hardened-steel nozzle, Bambu Lab documents support for carbon-/glass-fibre-reinforced filaments alongside PLA, PETG, ABS, ASA, TPU, PET, PA, PC and PVA — no nozzle swap needed.

Chainable multi-material system

The P2S supports up to 4 AMS 2 Pro plus 4 AMS HT units in series for extended multi-colour and multi-material capacity.

Is this right for you?

Perfect for

Fast everyday and production printing
PLA, PETG, TPU, ABS, ASA and PC work in an enclosed chamber
Makers who want AI failure detection out of the box
Multi-colour printing when paired with AMS 2 Pro (sold separately)
Reinforced carbon-/glass-fibre filament work straight out of the box

Not ideal for

Buyers who need multi-colour out of the box — AMS 2 Pro is a separate purchase
Fine miniature and detail work where resin is more appropriate

Why P2S?

The P2S: a fast, enclosed CoreXY printer with AI failure detection and a hardened-steel nozzle out of the box.

Key Features

Fully automatic calibration

Effortless setup — bed levelling and extrusion tuning are handled by the printer.

600 mm/s high-speed printing

Fast, precise printing performance.

All-metal hotend up to 300 °C

Supports the materials documented for this printer.

256 × 256 × 256 mm build volume

Room for the models you want to make.

Full specifications

Build Volume: 256 × 256 × 256 mm
Max Speed: 600 mm/s
Technology: FDM (CoreXY)
Camera: Built-in, 1920×1080, 30 fps
Hotend: Up to 300 °C
Nozzle: 0.4 mm hardened steel (included)
Weight: 14.9 kg
Sensors: Door, filament run-out, tangle, power-loss recovery; odometry with AMS

Dimensions: 392 × 406 × 478 mm
Build plate: Textured PEI (flexible steel plate), up to 110 °C
Calibration: Auto flow-dynamics calibration
Connectivity: Wi-Fi
Multi-colour: AMS 2 Pro compatible (sold separately)
Filament cutter: Built-in
Max acceleration: 20,000 mm/s²
Filament diameter: 1.75 mm

Common questions

Does this printer include AMS 2 Pro?

No. The P2S is AMS 2 Pro compatible, but AMS 2 Pro is a separate accessory and is not included with this unit.

What is the build volume?

256 × 256 × 256 mm.

What is the maximum print speed?

600 mm/s, with acceleration up to 20,000 mm/s².

Is the P2S enclosed?

Yes. It is a fully enclosed CoreXY printer.

Can it print carbon-fibre filament?

Yes — the P2S ships with a hardened-steel nozzle, so carbon-/glass-fibre-reinforced filaments are supported without a nozzle swap.

How many AMS units can it chain?

Up to 4 AMS 2 Pro plus 4 AMS HT units.

Is it suitable for production work?

Yes — AI failure detection, auto flow-dynamics calibration and a built-in filament cutter are built for repeatable, higher-throughput runs.